################################################################################ # # # Copyright 1997 - 2020 by IXIA Keysight # # All Rights Reserved. # # # # ############################################################################## ################################################################################ # # # LEGAL NOTICE: # # ============== # # The following code and documentation (hereinafter "the script") is an # # example script for demonstration purposes only. # # The script is not a standard commercial product offered by Ixia and have # # been developed and is being provided for use only as indicated herein. The # # script [and all modifications, enhancements and updates thereto (whether # # made by Ixia and/or by the user and/or by a third party)] shall at all times # # remain the property of Ixia. # # # # Ixia does not warrant (i) that the functions contained in the script will # # meet the user's requirements or (ii) that the script will be without # # omissions or error-free. # # THE SCRIPT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, AND IXIA # # DISCLAIMS ALL WARRANTIES, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, # # INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR # # A PARTICULAR PURPOSE OR OF NON-INFRINGEMENT. # # THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SCRIPT IS WITH THE # # USER. # # IN NO EVENT SHALL IXIA BE LIABLE FOR ANY DAMAGES RESULTING FROM OR ARISING # # OUT OF THE USE OF, OR THE INABILITY TO USE THE SCRIPT OR ANY PART THEREOF, # # INCLUDING BUT NOT LIMITED TO ANY LOST PROFITS, LOST BUSINESS, LOST OR # # DAMAGED DATA OR SOFTWARE OR ANY INDIRECT, INCIDENTAL, PUNITIVE OR # # CONSEQUENTIAL DAMAGES, EVEN IF IXIA HAS BEEN ADVISED OF THE POSSIBILITY OF # # SUCH DAMAGES IN ADVANCE. # # Ixia will not be required to provide any software maintenance or support # # services of any kind (e.g., any error corrections) in connection with the # # script or any part thereof. The user acknowledges that although Ixia may # # from time to time and in its sole discretion provide maintenance or support # # services for the script, any such services are subject to the warranty and # # damages limitations set forth herein and will not obligate Ixia to provide # # any additional maintenance or support services. # # # ################################################################################ ################################################################################ # # # Description: # # This sample configures 10 IPv4 sessions on each of the two ports # # - Adds a Quick Flow Group # # - Edit some settings for the Quick Flow Group like: frameSize, frameRate # # - Generate Traffic # # - Apply Traffic # # - Start Traffic # # # ################################################################################ if not Object.const_defined?('Py') then class TestFailedError < Exception end class Py @@ports = [['10.200.115.151', 4, 1], ['10.200.115.151', 4, 2]] @@ixApiServer = '10.200.115.203' @@ixApiPort = 8009 def self.ports @@ports end def self.ixApiServer @@ixApiServer end def self.ixApiPort @@ixApiPort end end end ################################################################################ # Import the ixnetwork library # First add the library to Ruby's $LOAD_PATH: $:.unshift ################################################################################ require 'ixnetwork' @ixNet = IxNetwork.new ################################################################################ # Connect to IxNet client ################################################################################ @ixNet.connect(Py.ixApiServer, '-port', Py.ixApiPort, '-version', '7.40') ################################################################################ # Cleaning up IxNetwork ################################################################################ puts "Cleaning up IxNetwork..." @ixNet.execute('newConfig') ################################################################################ # Adding ports to configuration ################################################################################ puts "Adding ports to configuration" root = @ixNet.getRoot() @ixNet.add(root, 'vport') @ixNet.add(root, 'vport') @ixNet.commit() vPorts = @ixNet.getList(root, 'vport') vport1 = vPorts[0] vport2 = vPorts[1] ################################################################################ # Adding IPv4 endpoints to configuration ################################################################################ puts "Add topologies" @ixNet.add(root, 'topology') @ixNet.add(root, 'topology') @ixNet.commit() topo1 = @ixNet.getList(root, 'topology')[0] topo2 = @ixNet.getList(root, 'topology')[1] puts "Add ports to topologies" @ixNet.setAttribute(topo1, '-vports', vport1) @ixNet.setAttribute(topo2, '-vports', vport2) @ixNet.commit() puts "Add device groups to topologies" @ixNet.add(topo1, 'deviceGroup') @ixNet.add(topo2, 'deviceGroup') @ixNet.commit() dg1 = @ixNet.getList(topo1, 'deviceGroup')[0] dg2 = @ixNet.getList(topo2, 'deviceGroup')[0] puts "Add Ethernet stacks to device groups" @ixNet.add(dg1, 'ethernet') @ixNet.add(dg2, 'ethernet') @ixNet.commit() mac1 = @ixNet.getList(dg1, 'ethernet')[0] mac2 = @ixNet.getList(dg2, 'ethernet')[0] puts "Add ipv4 stacks to Ethernets" @ixNet.add(mac1, 'ipv4') @ixNet.add(mac2, 'ipv4') @ixNet.commit() ipv4_1 = @ixNet.getList(mac1, 'ipv4')[0] ipv4_2 = @ixNet.getList(mac2, 'ipv4')[0] puts "Setting multi values for ipv4 addresses" @ixNet.setMultiAttribute(@ixNet.getAttribute(ipv4_1, '-address') + '/counter', '-start', '22.1.1.1', '-step', '0.0.1.0') @ixNet.setMultiAttribute(@ixNet.getAttribute(ipv4_1, '-gatewayIp') + '/counter', '-start', '22.1.1.2', '-step', '0.0.1.0') @ixNet.setMultiAttribute(@ixNet.getAttribute(ipv4_1, '-resolveGateway') + '/singleValue', '-value', 'true') @ixNet.setMultiAttribute(@ixNet.getAttribute(ipv4_2, '-address') + '/counter', '-start', '22.1.1.2', '-step', '0.0.1.0') @ixNet.setMultiAttribute(@ixNet.getAttribute(ipv4_2, '-gatewayIp') + '/counter', '-start', '22.1.1.1', '-step', '0.0.1.0') @ixNet.setMultiAttribute(@ixNet.getAttribute(ipv4_2, '-resolveGateway') + '/singleValue', '-value', 'true') @ixNet.commit() ################################################################################ # Assign ports ################################################################################ vports = @ixNet.getList(@ixNet.getRoot(), 'vport') puts "Assigning ports to " + vports.to_s + " ..." assignPorts = @ixNet.execute('assignPorts', Py.ports, [], @ixNet.getList("/","vport"), true) if assignPorts != vports then raise TestFailedError("FAILED assigning ports. Got " + assignPorts) else puts("PASSED assigning ports. Got " + assignPorts.to_s) end ################################################################################ # Start All Protocols ################################################################################ puts "Starting All Protocols" @ixNet.execute('startAllProtocols') puts "Sleep 30sec for protocols to start" sleep(30) ################################################################################ # Create a Basic Quick Flow Group ################################################################################ puts "######################" puts "## Traffic Samples ##" puts "######################" puts '' def addBasicQuickFlowGroup(ixNet, srcPort, dstPort ) puts "- add quick flow group" quick_flow_group = @ixNet.add('/traffic', 'trafficItem') ################################################################################ # Setting the quick flow group attributes ################################################################################ @ixNet.setMultiAttribute(quick_flow_group, '-name', 'Quick Flow Groups', '-trafficItemType', 'quick', '-trafficType', 'raw') @ixNet.commit() quick_flow_group = @ixNet.remapIds(quick_flow_group)[0] ################################################################################ # Setting the endpoint set attributes ################################################################################ endpoint_set = @ixNet.add(quick_flow_group, 'endpointSet') @ixNet.setMultiAttribute(endpoint_set, '-destinations', [dstPort+'/protocols'], '-sources', [srcPort+'/protocols']) @ixNet.commit() ################################################################################ # Set the frameSize, frameRate attributes for the first stream in endpoint set 1 ################################################################################ endpoint_set = @ixNet.remapIds(endpoint_set)[0] highlevelstream1 = @ixNet.getList(quick_flow_group, 'highLevelStream')[0] @ixNet.setAttribute(highlevelstream1+'/frameSize', '-fixedSize', '120') @ixNet.setAttribute(highlevelstream1+'/frameRate', '-rate', '500') @ixNet.setAttribute(highlevelstream1+'/frameRate', '-type', 'framesPerSecond') @ixNet.commit() ################################################################################ # setting the Ethernet source and destination mac addresses ################################################################################ for stack in @ixNet.getList(highlevelstream1, 'stack').each do if stack.include?("ethernet-") then for field in @ixNet.getList(stack, 'field') if field.include?("ethernet.header.destinationAddress-") then @ixNet.setAttribute(field, '-singleValue', '33:00:00:00:00:00') elsif field.include?("ethernet.header.sourceAddress-") @ixNet.setAttribute(field, '-singleValue', '11:00:00:00:00:00') end end end end @ixNet.commit() end ################################################################################ # Add the Quick Flow Group, Generate, Apply and Start the traffic ################################################################################ puts("- Add Quick Flow Group") addBasicQuickFlowGroup(@ixNet, vport1, vport2) puts "- Generate Traffic" ti1 = @ixNet.getList('/traffic', 'trafficItem') @ixNet.execute('generate', ti1) puts "- Apply Traffic" @ixNet.execute('apply', '/traffic') puts "- Start Traffic" @ixNet.execute('start', '/traffic') puts "Sleep 30sec then stop traffic" sleep(30) puts "- Stop Traffic" @ixNet.execute('stop', '/traffic') ################################################################################ # Stop All Protocols ################################################################################ puts "Stop All Protocols" @ixNet.execute('stopAllProtocols') puts "Sleep 30sec for protocols to stop" sleep(30) puts("script done")